PC CONTROL COMMAND REFERENCE FOR THE TS-890S TRANSCEIVER (PDF:841KB)įirmware Updating Program TS-590G Update Version 1.06 TS-890S KENWOOD NETWORK COMMAND SYSTEM Setting Manual (PDF:1.63MB) Radio Control Program ARCP-890 Version 1.01 PC CONTROL COMMAND REFERENCE FOR THE TS-990S TRANSCEIVER (PDF:773KB) TS-990S KENWOOD NETWORK COMMSND SYSTEM Setting Manual (PDF:898KB) USB Audio Controller ARUA-10 Version 4.00 Radio Control Program ARCP-990 Version 1.04
This transfer can also be accomplished by simply double clicking on the desired DAT file.AMATEUR RADIO PRODUCTS SOFTWARE DOWNLOADSĪmateur radio instruction manuals downloads The pre-selected information will be transferred to line 1 of the Zone Information screen.
For example, if a TK-3170 UHF transceiver is to be used with Tone Operated Relay, select file “CALL_3170_TOR_OUT.dat” (this information will appear in the File Name box). Select the “CALL_x17x_.dat” file corresponding to the transceiver model number and the Squelch If it does not automatically appear, use the “Look In” screen and follow “Program Files\Kenwood Fpu\KPG101D\DATA” to access the DAT files.ĥ. The GTC DAT File screen shouldĪutomatically appear on the screen. Select File from the menu, then Open from the drop-down box. Upon start-up of the KPG-101D, the software will open to theĤ. Insert the proprietary accessory connector (3.5/2.5 mm) to the radio’s accessory port.ģ.
(KPG-22A) to one of the PC’s serial ports.Ģ. Connect the 25-pin male serial port connector (KPG-22) or nine-pin male serial port connector DO NOT change or modify any other parameters other than those specifically noted in these instructions.Ĭonnections (KPG-22 or KPG-22A Programming Cables)ġ. All KPG-101D programming changes required for proper RF Call Box operation are noted in the following instructions. : The DAT files provided with the 190-3170K Adapter Kit include pre-programmed The information below pertains to programming necessary for proper RF Call Box operation. The KPG-101D Software contains a complete and concise help file to explain all the parameters pertaining to your standard programming needs. Select the appropriate channel via the channel selector on the top of the portable. Multiple radio channels can be programmed into the radio list, but only one may be used at a time.
The TK-3170 Series Radios have multiple frequency capability, however the RF Call Box only utilizes one transmit and one Receive frequency. Copy the seven files on the CD to the “GTC DAT Files” folder and remove the DAT CD from the drive. Insert the DAT CD, provided with the 190-3170K Adapter Kit, in the PC’s CD-ROM drive. Create a new folder under “Program Files\Kenwood Fpu” and name the new folder “GTC DAT Files”. In the system Program Files (with the KPG-101D installed), open the “Kenwood Fpu” folder. Remove the CD after installation is complete. An icon representing the software may also appear on the PC’s desktop display. Installing new KPG- 101D Software will create a “ Kenwood Fpu” folder in the PC’s Program Files folder. If the Kenwood KPG-101D (FPU) programming software has not previously been installed in the programming PC, follow the installation instructions provided with the software.